Filters
Question type
Study Flashcards

Decorte Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Decorte Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job K332 was completed with the following characteristics: The amount of overhead applied to Job K332 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $812 B) $350 C) $462 D) $1,162 Recently, Job K332 was completed with the following characteristics: Decorte Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job K332 was completed with the following characteristics: The amount of overhead applied to Job K332 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $812 B) $350 C) $462 D) $1,162 The amount of overhead applied to Job K332 is closest to: (Round your intermediate calculations to 2 decimal places.)


A) $812
B) $350
C) $462
D) $1,162

E) All of the above
F) A) and D)

Correct Answer

verifed

verified

Deloria Corporation has two production departments, Forming and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Deloria Corporation has two production departments, Forming and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job T288. The following data were recorded for this job: The predetermined overhead rate for the Assembly Department is closest to: A) $3.00 per direct labor-hour B) $12.70 per direct labor-hour C) $9.70 per direct labor-hour D) $5.35 per direct labor-hour During the current month the company started and finished Job T288. The following data were recorded for this job: Deloria Corporation has two production departments, Forming and Assembly. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Assembly Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job T288. The following data were recorded for this job: The predetermined overhead rate for the Assembly Department is closest to: A) $3.00 per direct labor-hour B) $12.70 per direct labor-hour C) $9.70 per direct labor-hour D) $5.35 per direct labor-hour The predetermined overhead rate for the Assembly Department is closest to:


A) $3.00 per direct labor-hour
B) $12.70 per direct labor-hour
C) $9.70 per direct labor-hour
D) $5.35 per direct labor-hour

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

B

Bierce Corporation has two manufacturing departments--Machining and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Bierce Corporation has two manufacturing departments--Machining and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job B and Job K. There were no beginning inventories. Data concerning those two jobs follow: Required: a. Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours. Calculate that overhead rate. b. Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours. Calculate the amount of manufacturing overhead applied to Job B. c. Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours. Calculate the amount of manufacturing overhead applied to Job K. d. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments. What is the departmental predetermined overhead rate in the Machining department? e. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. What is the departmental predetermined overhead rate in the Finishing department? f. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. How much manufacturing overhead will be applied to Job B? g. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. How much manufacturing overhead will be applied to Job K? During the most recent month, the company started and completed two jobs--Job B and Job K. There were no beginning inventories. Data concerning those two jobs follow: Bierce Corporation has two manufacturing departments--Machining and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job B and Job K. There were no beginning inventories. Data concerning those two jobs follow: Required: a. Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours. Calculate that overhead rate. b. Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours. Calculate the amount of manufacturing overhead applied to Job B. c. Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours. Calculate the amount of manufacturing overhead applied to Job K. d. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments. What is the departmental predetermined overhead rate in the Machining department? e. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. What is the departmental predetermined overhead rate in the Finishing department? f. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. How much manufacturing overhead will be applied to Job B? g. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. How much manufacturing overhead will be applied to Job K? Required: a. Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours. Calculate that overhead rate. b. Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours. Calculate the amount of manufacturing overhead applied to Job B. c. Assume that the company uses a plantwide predetermined manufacturing overhead rate based on machine-hours. Calculate the amount of manufacturing overhead applied to Job K. d. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments. What is the departmental predetermined overhead rate in the Machining department? e. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. What is the departmental predetermined overhead rate in the Finishing department? f. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. How much manufacturing overhead will be applied to Job B? g. Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. How much manufacturing overhead will be applied to Job K?

Correct Answer

verifed

verified

a. The first step is to calculate the es...

View Answer

Quiet Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on 40,000 machine-hours, total fixed manufacturing overhead cost of $152,000, and a variable manufacturing overhead rate of $3.10 per machine-hour. Required: Calculate the estimated total manufacturing overhead for the year.

Correct Answer

verifed

verified

Estimated total manufacturing overhead c...

View Answer

Claybrooks Corporation has two manufacturing departments--Casting and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Claybrooks Corporation has two manufacturing departments--Casting and Assembly. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments. The departmental predetermined overhead rate in the Casting Department is closest to: A) $1.50 B) $7.40 C) $5.90 D) $6.48 Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both departments. The departmental predetermined overhead rate in the Casting Department is closest to:


A) $1.50
B) $7.40
C) $5.90
D) $6.48

E) B) and C)
F) A) and C)

Correct Answer

verifed

verified

B

Beans Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $162,000, variable manufacturing overhead of $2.80 per direct labor-hour, and 60,000 direct labor-hours. Recently, Job K818 was completed with the following characteristics: Beans Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on direct labor-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $162,000, variable manufacturing overhead of $2.80 per direct labor-hour, and 60,000 direct labor-hours. Recently, Job K818 was completed with the following characteristics: The total job cost for Job K818 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $1,675 B) $2,595 C) $1,195 D) $2,320 The total job cost for Job K818 is closest to: (Round your intermediate calculations to 2 decimal places.)


A) $1,675
B) $2,595
C) $1,195
D) $2,320

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T687 was completed with the following characteristics: The predetermined overhead rate is closest to: A) $12.60 per machine-hour B) $10.50 per machine-hour C) $8.40 per machine-hour D) $2.10 per machine-hour Recently, Job T687 was completed with the following characteristics: Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T687 was completed with the following characteristics: The predetermined overhead rate is closest to: A) $12.60 per machine-hour B) $10.50 per machine-hour C) $8.40 per machine-hour D) $2.10 per machine-hour The predetermined overhead rate is closest to:


A) $12.60 per machine-hour
B) $10.50 per machine-hour
C) $8.40 per machine-hour
D) $2.10 per machine-hour

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Rondo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Rondo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently Job T506 was completed with the following characteristics: Required: a. Calculate the estimated total manufacturing overhead for the year. b. Calculate the predetermined overhead rate for the year. c. Calculate the amount of overhead applied to Job T506. d. Calculate the total job cost for Job T506. e. Calculate the unit product cost for Job T506. f. Calculate the selling price for Job T506 if the company marks up its unit product costs by 20%. Recently Job T506 was completed with the following characteristics: Rondo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently Job T506 was completed with the following characteristics: Required: a. Calculate the estimated total manufacturing overhead for the year. b. Calculate the predetermined overhead rate for the year. c. Calculate the amount of overhead applied to Job T506. d. Calculate the total job cost for Job T506. e. Calculate the unit product cost for Job T506. f. Calculate the selling price for Job T506 if the company marks up its unit product costs by 20%. Required: a. Calculate the estimated total manufacturing overhead for the year. b. Calculate the predetermined overhead rate for the year. c. Calculate the amount of overhead applied to Job T506. d. Calculate the total job cost for Job T506. e. Calculate the unit product cost for Job T506. f. Calculate the selling price for Job T506 if the company marks up its unit product costs by 20%.

Correct Answer

verifed

verified

a. Estimated total manufacturing overhea...

View Answer

Columbo Corporation has two production departments, Forming and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Columbo Corporation has two production departments, Forming and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A948. The following data were recorded for this job: If the company marks up its manufacturing costs by 40% then the selling price for Job A948 would be closest to: (Round your intermediate calculations to 2 decimal places.) A) $6,197.80 B) $1,770.80 C) $4,427.00 D) $6,818.00 During the current month the company started and finished Job A948. The following data were recorded for this job: Columbo Corporation has two production departments, Forming and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A948. The following data were recorded for this job: If the company marks up its manufacturing costs by 40% then the selling price for Job A948 would be closest to: (Round your intermediate calculations to 2 decimal places.) A) $6,197.80 B) $1,770.80 C) $4,427.00 D) $6,818.00 If the company marks up its manufacturing costs by 40% then the selling price for Job A948 would be closest to: (Round your intermediate calculations to 2 decimal places.)


A) $6,197.80
B) $1,770.80
C) $4,427.00
D) $6,818.00

E) A) and D)
F) All of the above

Correct Answer

verifed

verified

Sanderlin Corporation has two manufacturing departments--Machining and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: Sanderlin Corporation has two manufacturing departments--Machining and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job C and Job L. There were no beginning inventories. Data concerning those two jobs follow: Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. The manufacturing overhead applied to Job L is closest to: (Round your intermediate calculations to 2 decimal places.) A) $11,680 B) $28,780 C) $17,100 D) $29,900 During the most recent month, the company started and completed two jobs--Job C and Job L. There were no beginning inventories. Data concerning those two jobs follow: Sanderlin Corporation has two manufacturing departments--Machining and Finishing. The company used the following data at the beginning of the year to calculate predetermined overhead rates: During the most recent month, the company started and completed two jobs--Job C and Job L. There were no beginning inventories. Data concerning those two jobs follow: Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. The manufacturing overhead applied to Job L is closest to: (Round your intermediate calculations to 2 decimal places.) A) $11,680 B) $28,780 C) $17,100 D) $29,900 Assume that the company uses departmental predetermined overhead rates with machine-hours as the allocation base in both production departments. The manufacturing overhead applied to Job L is closest to: (Round your intermediate calculations to 2 decimal places.)


A) $11,680
B) $28,780
C) $17,100
D) $29,900

E) A) and D)
F) All of the above

Correct Answer

verifed

verified

Job 652 was recently completed. The following data have been recorded on its job cost sheet: Job 652 was recently completed. The following data have been recorded on its job cost sheet: The company applies manufacturing overhead on the basis of direct labor-hours. The predetermined overhead rate is $35 per direct labor-hour. Required: Compute the unit product cost that would appear on the job cost sheet for this job. The company applies manufacturing overhead on the basis of direct labor-hours. The predetermined overhead rate is $35 per direct labor-hour. Required: Compute the unit product cost that would appear on the job cost sheet for this job.

Correct Answer

verifed

verified

Bulla Corporation has two production departments, Machining and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Bulla Corporation has two production departments, Machining and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job K369. The following data were recorded for this job: Required: Calculate the total amount of overhead applied to Job K369 in both departments. During the current month the company started and finished Job K369. The following data were recorded for this job: Bulla Corporation has two production departments, Machining and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job K369. The following data were recorded for this job: Required: Calculate the total amount of overhead applied to Job K369 in both departments. Required: Calculate the total amount of overhead applied to Job K369 in both departments.

Correct Answer

verifed

verified

Machining Department:
Machining Departme...

View Answer

Cull Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $462,000, variable manufacturing overhead of $2.20 per machine-hour, and 60,000 machine-hours. The company has provided the following data concerning Job X455 which was recently completed: Cull Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on total fixed manufacturing overhead cost of $462,000, variable manufacturing overhead of $2.20 per machine-hour, and 60,000 machine-hours. The company has provided the following data concerning Job X455 which was recently completed: If the company marks up its unit product costs by 20% then the selling price for a unit in Job X455 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $258.32 B) $190.80 C) $39.72 D) $238.32 If the company marks up its unit product costs by 20% then the selling price for a unit in Job X455 is closest to: (Round your intermediate calculations to 2 decimal places.)


A) $258.32
B) $190.80
C) $39.72
D) $238.32

E) A) and B)
F) A) and C)

Correct Answer

verifed

verified

Vanliere Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Vanliere Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A803. The following data were recorded for this job: The predetermined overhead rate for the Finishing Department is closest to: A) $8.80 per direct labor-hour B) $3.98 per direct labor-hour C) $12.60 per direct labor-hour D) $3.80 per direct labor-hour During the current month the company started and finished Job A803. The following data were recorded for this job: Vanliere Corporation has two production departments, Machining and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Machining Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A803. The following data were recorded for this job: The predetermined overhead rate for the Finishing Department is closest to: A) $8.80 per direct labor-hour B) $3.98 per direct labor-hour C) $12.60 per direct labor-hour D) $3.80 per direct labor-hour The predetermined overhead rate for the Finishing Department is closest to:


A) $8.80 per direct labor-hour
B) $3.98 per direct labor-hour
C) $12.60 per direct labor-hour
D) $3.80 per direct labor-hour

E) None of the above
F) All of the above

Correct Answer

verifed

verified

Sullen Corporation uses a predetermined overhead rate base on machine-hours that it recalculates at the beginning of each year. The company has provided the following data for the most recent year. Sullen Corporation uses a predetermined overhead rate base on machine-hours that it recalculates at the beginning of each year. The company has provided the following data for the most recent year. Required: Determine the amount of manufacturing overhead that would have been applied to all jobs during the period. Required: Determine the amount of manufacturing overhead that would have been applied to all jobs during the period.

Correct Answer

verifed

verified

Rocher Corporation has two production departments, Casting and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Rocher Corporation has two production departments, Casting and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A394. The following data were recorded for this job: Required: a. Calculate the estimated total manufacturing overhead for the Casting Department. b. Calculate the predetermined overhead rate for the Casting Department. c. Calculate the amount of overhead applied in the Casting Department to Job A394. During the current month the company started and finished Job A394. The following data were recorded for this job: Rocher Corporation has two production departments, Casting and Finishing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Casting Department's predetermined overhead rate is based on machine-hours and the Finishing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A394. The following data were recorded for this job: Required: a. Calculate the estimated total manufacturing overhead for the Casting Department. b. Calculate the predetermined overhead rate for the Casting Department. c. Calculate the amount of overhead applied in the Casting Department to Job A394. Required: a. Calculate the estimated total manufacturing overhead for the Casting Department. b. Calculate the predetermined overhead rate for the Casting Department. c. Calculate the amount of overhead applied in the Casting Department to Job A394.

Correct Answer

verifed

verified

a. Casting Department overhead cost = Fi...

View Answer

An employee time ticket is an hour-by-hour summary of the employee's activities throughout the day.

A) True
B) False

Correct Answer

verifed

verified

Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T687 was completed with the following characteristics: The total job cost for Job T687 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $1,365 B) $1,725 C) $990 D) $2,040 Recently, Job T687 was completed with the following characteristics: Lupo Corporation uses a job-order costing system with a single plantwide predetermined overhead rate based on machine-hours. The company based its predetermined overhead rate for the current year on the following data: Recently, Job T687 was completed with the following characteristics: The total job cost for Job T687 is closest to: (Round your intermediate calculations to 2 decimal places.) A) $1,365 B) $1,725 C) $990 D) $2,040 The total job cost for Job T687 is closest to: (Round your intermediate calculations to 2 decimal places.)


A) $1,365
B) $1,725
C) $990
D) $2,040

E) B) and C)
F) A) and C)

Correct Answer

verifed

verified

Comans Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Comans Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A319. The following data were recorded for this job: If the company marks up its manufacturing costs by 20% then the selling price for Job A319 would be closest to: (Round your intermediate calculations to 2 decimal places.) A) $5,042.00 B) $4,584.00 C) $3,820.00 D) $764.00 During the current month the company started and finished Job A319. The following data were recorded for this job: Comans Corporation has two production departments, Milling and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Milling Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job A319. The following data were recorded for this job: If the company marks up its manufacturing costs by 20% then the selling price for Job A319 would be closest to: (Round your intermediate calculations to 2 decimal places.) A) $5,042.00 B) $4,584.00 C) $3,820.00 D) $764.00 If the company marks up its manufacturing costs by 20% then the selling price for Job A319 would be closest to: (Round your intermediate calculations to 2 decimal places.)


A) $5,042.00
B) $4,584.00
C) $3,820.00
D) $764.00

E) A) and D)
F) C) and D)

Correct Answer

verifed

verified

Pangle Corporation has two production departments, Forming and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: Pangle Corporation has two production departments, Forming and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job M109. The following data were recorded for this job: Required: Calculate the total job cost for Job M109. During the current month the company started and finished Job M109. The following data were recorded for this job: Pangle Corporation has two production departments, Forming and Customizing. The company uses a job-order costing system and computes a predetermined overhead rate in each production department. The Forming Department's predetermined overhead rate is based on machine-hours and the Customizing Department's predetermined overhead rate is based on direct labor-hours. At the beginning of the current year, the company had made the following estimates: During the current month the company started and finished Job M109. The following data were recorded for this job: Required: Calculate the total job cost for Job M109. Required: Calculate the total job cost for Job M109.

Correct Answer

verifed

verified

Forming Department: Forming Department overhead cost = Fixed manufacturing overhead cost + (Variable overhead cost per machine-hour × Total machine-hours in the department) = $91,200 + ($2.10 per machine-hour × 16,000 machine-hours) = $91,200 +$33,600 = $124,800 Predetermined overhead rate = Estimated total manufacturing overhead cost ÷ Estimated total amount of the = $124,800 ÷ 16,000 machine-hours = $7.80 per machine-hour Overhead applied to a particular job = Predetermined overhead rate × Amount of the allocation base incurred by the job = $7.80 per machine-hour × 50 machine-hours = $390 Customizing Department: Customizing Department overhead cost = Fixed manufacturing overhead cost + (Variable overhead cost per direct labor-hour × Total direct labor-hours in the department) = $99,000 + ($3.10 per direct labor-hour × 9,000 direct labor-hours) = $99,000 + $27,900 = $126,900 Predetermined overhead rate = Estimated total manufacturing overhead cost ÷ Estimated total amount of the = $126,900 ÷ 9,000 direct labor-hours = $14.10 per direct labor-hour Overhead applied to a particular job = Predetermined overhead rate × Amount of the allocation base incurred by the job = $14.10 per direct labor-hour × 50 direct labor-hours = $705 Overhead applied to Job M109 11eacbfc_c75a_1ca3_8ffe_f3bb3dcc98dc_TB7552_00 11eacbfc_c75a_1ca4_8ffe_cba449220ca2_TB7552_00

Showing 1 - 20 of 292

Related Exams

Exam 1

Managerial Accounting and Cost Concepts

299 Questions

Exam 2

Costvolumeprofit Relationships

260 Questions

Exam 4

Variable Costing and Segment Reporting: Tools for Management

291 Questions

Exam 5

Activitybased Costing: a Tool to Aid Decision Making

213 Questions

Exam 6

Differential Analysis: the Key to Decision Making

203 Questions

Exam 7

Capital Budgeting Decisions

179 Questions

Exam 8

Master Budgeting

236 Questions

Exam 9

Flexible Budgets and Performance Analysis

417 Questions

Exam 10

Standard Costs and Variances

247 Questions

Exam 11

Performance Measurement in Decentralized Organizations

180 Questions

Exam 12

Cost of Quality

66 Questions

Exam 13

Analyzing Mixed Costs

82 Questions

Exam 14

Activity-Based Absorption Costing

20 Questions

Exam 15

the Predetermined Overhead Rate and Capacity

42 Questions

Exam 16

Super-Variable Costing

49 Questions

Exam 17

Time-Driven Activity-Based Costing: a Microsoft Excel-Based Approach

123 Questions

Exam 18

Pricing Decisions

149 Questions

Exam 19

the Concept of Present Value

16 Questions

Exam 20

Income Taxes and the Net Present Value Method

150 Questions

Exam 21

Predetermined Overhead Rates and Overhead Analysis in a Standard Costing System

177 Questions

Exam 22

Transfer Pricing

102 Questions

Exam 22

Service Department Charges

44 Questions

Show Answer